AçıklamaAluminium heat reflector with hole melted through by high temperatures.jpg
Deutsch: Hitzereflektor aus Aluminium. Das Loch entstand durch Hitzeeinwirkung bis über die Schmelzgrenze (über 600°C), wodurch das Aluminium zwischen den Oberflächen des Blechs nach unten floss bis nur noch löcheriges Aluminiumoxid die Öffnung teilweise verschloss. Das flüssige Aluminium sammelte sich im Bereich unter dem Loch, wo es auch nach dem Erkalten die Oberfläche sichtbar ausbeult. Das Aluminium entzündete sich nicht, brannte nicht, tropfte nicht mit brennenden Tropfen und produzierte keinen Rauch. Nur das Loch entstand.
English: Heat reflector made of aluminium. The hole developed as a result of heat that was above the melting point (above 600°C)of the aluminium. The liquid Aluminium ran down between the surfaces of the sheet, leaving a perforated very thin aluminium oxide film above. The liquid aluminium cumulated beneath the hole and bulged the surfaces that is recocnizable even after cooling down. The Aluminium didn't combust, didn't catch fire, didn't drip with burning drops and didn't produce smoke. Only the hole was revealed.
atıf – Esere yazar veya lisans sahibi tarafından belirtilen (ancak sizi ya da eseri kullanımınızı desteklediklerini ileri sürmeyecek bir) şekilde atıfta bulunmalısınız.
benzer paylaşım – Maddeyi yeniden karıştırır, dönüştürür veya inşa ederseniz, katkılarınızı orijinal olarak aynı veya uyumlu lisans altında dağıtmanız gerekir.
Bu dosyada, muhtemelen fotoğraf makinesi ya da tarayıcı tarafından eklenmiş ek bilgiler mevcuttur. Eğer dosyada sonradan değişiklik yapıldıysa, bazı bilgiler yeni değişikliğe göre eski kalmış olabilir.